IECCO

REWINDERS’ END CONNECTOR

Enamel/Varnish removing/stripping chemical compounds

The high quality insulating enamel/varnish
removing/stripping chemicals, manufactured by
us for the FIRST time in India, since 1974.

Advantages:
  • It replaces the primitive method of removing enamels by scrapping or burning.
  • IECCO’S REWINDERS’ END CONNECTOR does not affect the metal surface, hence, maintaining its quality to withstand designed voltage fluctuations.
  • IECCO’S REWINDERS’ END CONNECTOR will not form metallic oxide on the surface.
  • IECCO’S REWINDERS’ END CONNECTOR does not react with the metal; unlike in scrapping method, it will not reduce the diameter of the wire-end.
  • IECCO’S REWINDERS’ END CONNECTOR does not react with the metal; unlike in scrapping method, it will not reduce the diameter of the wire-end.
  • It reduces the man – power required, in comparison with the scrapping or burning the enamel.
  • This process can be carried our in any of one shifts while the further processing of coils / wires can be done in other shifts.
  • The man – hour required to strip enamels is reduced which will compliment to reduction in production time and hence increase the rate of production.
  • IECCO's Rewinders' End Connector increases the production capacity with improving quality, reduces labours and thereby making your production step most economical and finally increase your profitability. Finally, IECCO’s Rewinders’ End Connector makes soldering, brazing and tinning to be very sound and effective.

IECCO’s Rewinders’ End Connector removes all type and class of the insulating enamels and varnishes like oil based, polyvinyl formal, modified polyvinyl formal, polyurethane, polyester, modified polyester, polyesterimide, polyimide, polyamide-imide, polyester-imide over-coated polyamide-imide dual coating and any other stubborn enamels/varnishes. However, the time of action is determined by the type and class of the insulating enamel/varnishes and number of coatings to be removed.

REWINDERS’ END CONNECTOR

IECCO's Rewinders' End Connector is used by wide variety of personnel and industries. Few of them are listed below:

  • Coil Winding and Insulation Division/ Department/Workshop.
  • Electric Motor manufacturers, winders and repairers.
  • Transformer, Dynamo and Starter manufacturers.
  • Electrical/Electronic Instruments/Meters, Energy Meters, etc. manufacturers.
  • Luminaries, Fan, Mixtures, Portable Tools, Grinders, etc. manufacturers and repairers.
  • Heavy Electrical Equipments and Rotating Machines manufacturers and repairers.
  • Coils of various size and shape manufacturers.
  • State Electricity Boards, Thermal Power Station, Hydro Power Station and similar industries.
  • Switch gears and Relays manufacturers.
  • Television and Radio Industries.
  • Electric / Electronic control Equipment Manufacturers.
  • Auto electrical equipments manufacturers.
  • Air - craft / Ship-builders / Railways Electrical Workshop / Repairers.
  • And many more type of electrical/electronic industries where insulating enamel / varnish are used regularly.

IECCO’s Rewinders’ End Connector available in the various grades to suit individual requirements, as under:-

Sr. No. Particulars Physical Form Application
01. IECCO REC-101 Semi-jelly, Non-acidic.
Removes all type and class of insulating enamels and varnishes from coil-ends of winding wires and strips and undesired backed impregnated varnishes from the armature, motor-body, etc. This works at room temperature and very quick in action.
02. IECCO REC-111 Liquid Non-acidic.
Removes enamels and varnishes from the coil-end and strips by immersion method. Also used to remove enamels/varnishes from the rejected winding wires, strips, stamping and similar articles for direct re-enamelling and/or re-varnishing or for similar applications or for sale as copper/aluminum scrape.
03. IECCO REC-105 Semi-jelly Acidic.
Removes medium type of enamels and varnishes quickly from the coil-ends and undesired backed impregnated varnishes from the armature, motor-body, etc. This works at room temperature.
04. IECCO REC-155 Liquid, Non-acidic.
Removes high temperature enamels and vanishes including H-class, Dual coating quickly. This works at temperature of about 95 degree C- 105 degree C using temperature controlled solder pot. This product is unsuitable for aluminum wires/strips.